Most favorable price : sales@hellerbearings.com

We can provide free samples . Please contact Email for any inquiries

 
 
d 100 mm Bore diameter
D 215 mm Outside diameter
T 77.5 mm Total width
B 73 mm Width of inner ring
C 60 mm Width of outer ring
Cup r (min.) 3 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 4 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 695000 N Basic dynamic load rating
C0r 755000 N Basic static load rating
Speeds 
Grease 1700 min-1 Grease lubrication
Oil (Oil-bath) 2400 min-1 Oil-bath lubrication
Dimensions
a 53.2 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 125 mm Diameter of shaft abutment
Db (min.) 200 mm Diameter of housing abutment
Da (min.) 178 mm Diameter of housing abutment
Da (max.) 201 mm Diameter of housing abutment
Sa 5 mm Minimum width of space required in housing on large side face
Sb 17.5 mm Minimum width of space required in housing on small side face
db (max.) 125 mm Diameter of shaft abutment
ra (max.) 3 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2.5 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.35 Constant
Y0 0.96 Axial load Factors
Y1 1.7 Axial load Factors
Mass
(approx.) 12.7 kg
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
HR32320J bearings 

<>ZWZ HR32320J