Standard operation of bearing designation OF 6313 BEARING failure

Most favorable price : sales@hellerbearings.com

We can provide free samples . Please contact Email for any inquiries

Bearing failure is often due to a variety of factors influence the design and manufacturing process, all factors and bearing fault, their analysis is not easy to determine. Under normal circumstances, in general, you can consider and analyze factors and internal factors.
For the main factors is the adjustment of the installation, use and maintenance, maintenance and repair, etc. in accordance with the technical requirements. Installation conditions is one of the factors bearing is the primary factor often cause packet state change between the various parts of the incorrect installation of the bearing capacity, in the abnormal state of operation and early failure. According to the bearing installation, use, maintenance, maintenance technology bearing load, operating speed, temperature, vibration, noise and the lubrication state monitoring and inspection, found abnormal immediately find reasons, adjusting to bearing designation OF 6313 BEARING normal. In addition, the oil and the surrounding medium quality, atmosphere analysis test is also very important.

bearing designation OF 6313 BEARING
Bearing chamfer not determine the quality of bearing designation OF 6313 BEARING the bearing, but it reflects the processing method of bearing. Chamfering is black, that after quenching heat treatment, the hardness of bearing, and some people think bad angle of the black watch is not processed completely, this is misunderstanding.
One cage better than the two body, although new techniques are used one cage, but it only saves material, while the rotating performance worse than two body. Bearing chamfer not determine the quality of bearing designation OF 6313 BEARING the bearing, and some people think bad angle of the black watch is not processed completely, this is misunderstanding.
Internal factors mainly refers to bearing designation OF 6313 BEARING the structural design, manufacturing process and material quality, three factors determine the quality of bearing.
Firstly, the structure design and advanced at the same time, there will be a longer bearing life. Bearing manufacturing after forging, heat treatment, turning, grinding and assembly processes of operation. Treatment of advanced, rationality, stability will also affect the service life of bearing designation OF 6313 BEARING. Influence of process bearing heat treatment and grinding, often fault and bearing has a direct relationship related to the quality of the products. In recent years, the deterioration of the surface layer of bearing, the grinding process is close with the bearing surface quality.

234407BM 234706BM 234406BM 517/2860V/YA 5610/2500 517/1720X1V 527/1181M 510/1180M 517/930 510/670 590/560 510/500 52780 59080 517/368M 51760U 517/238 6207-2ZN 6206-2ZN 6205-2ZN 6204-2ZN 6203-RZ 6203-2ZN 6202N 6202-2ZN 6201-2ZN 6200ZZ 6200-2ZN 62/32-ZN 62/32-Z 62/32N 62/32-2Z 62/32-2RZ 62/32-2RS 62/28-2RZ 62/22-2RZ 61996 61992 61988 61984

Introduction

Portfolio Image
Portfolio Image
Portfolio Image
Portfolio Image
Portfolio Image
Top