We can provide free samples . Please contact Email for any inquiries

eda 32309 BRJ2-QCL7C  bearing raceway acoustic raceway and its control method is when the one-way bearing operation, the rolling element rolling and making a slippery continuous sound in the raceway surface, is a basic sound all rolling bearings are unique to happen. Bearings generally sound is rolling road sound with other sounds. Ball bearing raceway is irregular, frequencies above 1000Hz, the frequency rate does not change with the speed, but the overall sound pressure level increases with acceleration of the speed. Raceway bearing large, the raceway acoustic sound pressure level decreases with the increase in viscosity of the rolling bearing; but say small, the sound pressure level in the viscosity increases to about 20mm2/s above, by a reduction to increase. The bearing seat more rigid, rolling road sound of a sound pressure level is low. Such as the radial clearance is too small, rolling road sound of a sound pressure level and frequency with reduced radial clearance and increased dramatically. Control of raceway acoustic methods are: the selection of bearing low noise bearings which waviness small, carefully select the use conditions. Rolling road sound often affects the entire mechanical noise, reduce the raceway can reduce the noise of the whole machine.
Regarding the use of eda 32309 BRJ2-QCL7C  bearing notice as follows: The use of 1, circumspect. And bearing a strong impact in use, will have scars and indentation, became the cause of the accident.
In severe cases, will crack, fracture, so be careful.
In severe cases, will crack, fracture, so be careful. 2, keep the bearings and the surrounding clean
Even if is the eye cannot see small dust, will bring bad effect to the bearing.
So, to keep the surrounding clean, so that dust is not into the bearing. So, to keep the surrounding clean, so that dust is not into the bearing.
3, using the right tools
To avoid the existing tools instead, you must use the appropriate tool.
4, pay attention to corrosion of bearings
When operating the eda 32309 BRJ2-QCL7C  bearings, hand Khan will become the cause of rust. To note that the clean hands operation, the best to wear gloves.
Impact sound and its control method of rolling large models of ball bearings or cylindrical roller bearings under purely radial load and low speed operation, due to the centrifugal force of the rolling small, in the non load rolling will impact the holder or rolling road noise. But with the increase of rotational speed, the noise will disappear. On the rolling control method for impact sound: appropriate reduction of radial clearance, the use of reasonable structure and materials with a one-way bearing frame compliance.