Analysis of edabearing damage judgment
Most favorable price : sales@hellerbearings.com
The edabearing failure and deterioration, performance status parameter to determine and predict the reliability and performance of the bearing, parts of the abnormal situation, reasons and the degree of risk identification and judgment, comprehensive technology decided to repair and improvement method. Therefore, bearing fault diagnosis technology is not a simple fault detection (or monitoring) technology, is not simply a check of instrument. Properly, quickly, effectively signal acquisition, data processing, manual or automatic identification and judgment. In order to determine the repair cycle of science, also should be based on the failure mechanism, test and estimate the necessary for fatigue, wear life.
If you have the following defects can not use, the replacement of the new bearings must be. The inner ring, outer ring, rolling body, cage there any cracks or gaps. 1, ring, rolling body fault on any one.
1, ring, rolling body fault on any one.
2, rolling road surface, edge, scroll marked card injuries on the body.
3, the retainer wear significantly or rivet significant relaxation.
4, the raceway surface, rolling rust body, has the wound.
5, the raceway surface, rolling there is serious indentation and trace.
6, the diameter of the inner ring or outer diameter surface creep significantly.
7, due to thermal discoloration caused obvious.
8, edabearing grease sealed, seals or shields damaged obviously.
234407BM 234706BM 234406BM 517/2860V/YA 5610/2500 517/1720X1V 527/1181M 510/1180M 517/930 510/670 590/560 510/500 52780 59080 517/368M 51760U 517/238 6207-2ZN 6206-2ZN 6205-2ZN 6204-2ZN 6203-RZ 6203-2ZN 6202N 6202-2ZN 6201-2ZN 6200ZZ 6200-2ZN 62/32-ZN 62/32-Z 62/32N 62/32-2Z 62/32-2RZ 62/32-2RS 62/28-2RZ 62/22-2RZ 61996 61992 61988 61984
We can provide free samples . Please contact Email for any inquiries
Check near the edabearing oil seal condition to ensure they are sufficient to prevent the hot liquid, corrosive liquid and gas infiltration along the axis of the bearing oil seal, if damage should be replaced as soon as possible. Check the automatic lubricating system ensures that the oil or grease into the bearing, and ensure that the correct amount of added and check the lubricant is discolored or black, if there is such a situation typically lubricants contain impurities, the use of this can be harmful to the bearing.The edabearing failure and deterioration, performance status parameter to determine and predict the reliability and performance of the bearing, parts of the abnormal situation, reasons and the degree of risk identification and judgment, comprehensive technology decided to repair and improvement method. Therefore, bearing fault diagnosis technology is not a simple fault detection (or monitoring) technology, is not simply a check of instrument. Properly, quickly, effectively signal acquisition, data processing, manual or automatic identification and judgment. In order to determine the repair cycle of science, also should be based on the failure mechanism, test and estimate the necessary for fatigue, wear life.
If you have the following defects can not use, the replacement of the new bearings must be. The inner ring, outer ring, rolling body, cage there any cracks or gaps. 1, ring, rolling body fault on any one.
1, ring, rolling body fault on any one.
2, rolling road surface, edge, scroll marked card injuries on the body.
3, the retainer wear significantly or rivet significant relaxation.
4, the raceway surface, rolling rust body, has the wound.
5, the raceway surface, rolling there is serious indentation and trace.
6, the diameter of the inner ring or outer diameter surface creep significantly.
7, due to thermal discoloration caused obvious.
8, edabearing grease sealed, seals or shields damaged obviously.
