Influence of the inner ring is fixed on the edabearing temperature
Most favorable price : sales@hellerbearings.com
(1) check the cooling water pressure, flow and pipe system is normal edabearing. If low water pressure may be clogged filter, cannot be handled in time, can be shut down, when the confirmation work, and then put into use.
(2) governor oil pressure should be checked, if oil pressure may lead to cooling water hydraulic valve.
(3) check whether there is abnormal sound of bearing, and detection of the swing is abnormal.
(4) the oil sampling observation of oil color is changing, edabearings and tests to see whether the metamorphism. If the confirmation deterioration, downtime should be replaced with new oil.
(5) check the oil level gauge oil level is normal, if not normal, check whether the tank vent valve close. if is closed, should fill oil, if it is a sealant gasket oil leakage, should stop processing.
There must be avoided America high temperature phenomenon, so as to increase its service life.
Applicable to the support structure is fixed at both ends. Simple structure, small size.
The 2 circlips fixed
Shaft inner ring and the locking nut to achieve axial fixation.
Bi axial load can bear big.
Bi axial load can bear big.
The axial structure of small size.
3 the lock nut
edashaft inner ring and the locking nut to achieve axial fixation.
And stop washer lock, safe and reliable, suitable for high speed, heavy load situations.
And stop washer lock, safe and reliable, suitable for high speed, heavy load situations.
4 end thrust washer Shaft inner ring and shaft end ring to achieve axial fixation.
Shaft end ring fixed by screws at the shaft end.
Fixed screw locking device. Fixed screw locking device. Suitable for shaft ends should not be cutting threads or space constrained occasions.
The 5 fastening sleeve fixed
Relying on the radial size of holes in an adapter sleeve is compressed and the clamp on the shaft, to realize axial fixed inner ring.
The 6 sleeve fixed
The 6 sleeve fixed
Withdrawal sleeve clamping and locking set with the same. But the withdrawal sleeve with a special nuts, the convenient, suitable for larger radial load, double row spherical smaller axial loads in the on axis fixed.
In the fixed edabearing, operate in accordance with the method described above, it will prolong the service life of the bearing.
234407BM 234706BM 234406BM 517/2860V/YA 5610/2500 517/1720X1V 527/1181M 510/1180M 517/930 510/670 590/560 510/500 52780 59080 517/368M 51760U 517/238 6207-2ZN 6206-2ZN 6205-2ZN 6204-2ZN 6203-RZ 6203-2ZN 6202N 6202-2ZN 6201-2ZN 6200ZZ 6200-2ZN 62/32-ZN 62/32-Z 62/32N 62/32-2Z 62/32-2RZ 62/32-2RS 62/28-2RZ 62/22-2RZ 61996 61992 61988 61984
We can provide free samples . Please contact Email for any inquiries
temperature rise, the first to see if there are mistakes, if the temperature is rising, should do the following treatment immediately:(1) check the cooling water pressure, flow and pipe system is normal edabearing. If low water pressure may be clogged filter, cannot be handled in time, can be shut down, when the confirmation work, and then put into use.
(2) governor oil pressure should be checked, if oil pressure may lead to cooling water hydraulic valve.
(3) check whether there is abnormal sound of bearing, and detection of the swing is abnormal.
(4) the oil sampling observation of oil color is changing, edabearings and tests to see whether the metamorphism. If the confirmation deterioration, downtime should be replaced with new oil.
(5) check the oil level gauge oil level is normal, if not normal, check whether the tank vent valve close. if is closed, should fill oil, if it is a sealant gasket oil leakage, should stop processing.
There must be avoided America high temperature phenomenon, so as to increase its service life.
Applicable to the support structure is fixed at both ends. Simple structure, small size.
The 2 circlips fixed
Shaft inner ring and the locking nut to achieve axial fixation.
Bi axial load can bear big.
Bi axial load can bear big.
The axial structure of small size.
3 the lock nut
edashaft inner ring and the locking nut to achieve axial fixation.
And stop washer lock, safe and reliable, suitable for high speed, heavy load situations.
And stop washer lock, safe and reliable, suitable for high speed, heavy load situations.
4 end thrust washer Shaft inner ring and shaft end ring to achieve axial fixation.
Shaft end ring fixed by screws at the shaft end.
Fixed screw locking device. Fixed screw locking device. Suitable for shaft ends should not be cutting threads or space constrained occasions.
The 5 fastening sleeve fixed
Relying on the radial size of holes in an adapter sleeve is compressed and the clamp on the shaft, to realize axial fixed inner ring.
The 6 sleeve fixed
The 6 sleeve fixed
Withdrawal sleeve clamping and locking set with the same. But the withdrawal sleeve with a special nuts, the convenient, suitable for larger radial load, double row spherical smaller axial loads in the on axis fixed.
In the fixed edabearing, operate in accordance with the method described above, it will prolong the service life of the bearing.
