Linear guide use matters needing attention
Most favorable price : sales@hellerbearings.com
A. such as on the delivery of the product have been coated with anti-rust oil, please before use anti-rust oil is wiped clean, then encapsulated oil before use.
B. when oil lubrication is used, according to the installation of the slider, sometimes within the oil cannot reach orbit. If this happens, please negotiate with NSK.
(2) assembly
A. interchangeability products (that is, the guide rail and slide block can be arbitrary matching product) of the sliding block is provided in the form of on the abutment shaft. Therefore, when combined with guide rail, please pay attention to them.
B. such as unauthorized repair parts, it will lead to dust entering or connection parts and precision of the drops, for this, if not as a last resort, please do not remove easily.
C. sometimes only inclined guide rail, slider will be mobile, so at this time should be careful not to make the slider off from the guide rail.
D. standard end cover is made of plastic. Such as hard knocks or collision, will make its damage, so want to pay attention.
(3) use the matters needing attention
A. when used, please try to avoid dust or foreign bodies to enter.
B. please to set the temperature limit below 80 degrees (except for heat resistant specifications of the products.) more than the temperature, the plastic end cover may be damaged.
C. when customers themselves cut guide rail, the cutting surface after cutting burr and become warped edge entirely clean.
D. the slider in the suspended state (such as fixed on the ceiling slider downwards) when using, such as one thousand end cover is damaged, ball will roll out, lead to fall off from sliding block guide rail. For this purpose, please take the corresponding measures such as additional safety device in advance.
(4) keeping
Such as the bad condition of guide rail is placed, can cause rail deformation. The custody, it should be placed in an appropriate plane, horizontally to keep.
234407BM 234706BM 234406BM 517/2860V/YA 5610/2500 517/1720X1V 527/1181M 510/1180M 517/930 510/670 590/560 510/500 52780 59080 517/368M 51760U 517/238 6207-2ZN 6206-2ZN 6205-2ZN 6204-2ZN 6203-RZ 6203-2ZN 6202N 6202-2ZN 6201-2ZN 6200ZZ 6200-2ZN 62/32-ZN 62/32-Z 62/32N 62/32-2Z 62/32-2RZ 62/32-2RS 62/28-2RZ 62/22-2RZ 61996 61992 61988 61984
We can provide free samples . Please contact Email for any inquiries
(1) the lubricatingA. such as on the delivery of the product have been coated with anti-rust oil, please before use anti-rust oil is wiped clean, then encapsulated oil before use.
B. when oil lubrication is used, according to the installation of the slider, sometimes within the oil cannot reach orbit. If this happens, please negotiate with NSK.
(2) assembly
A. interchangeability products (that is, the guide rail and slide block can be arbitrary matching product) of the sliding block is provided in the form of on the abutment shaft. Therefore, when combined with guide rail, please pay attention to them.
B. such as unauthorized repair parts, it will lead to dust entering or connection parts and precision of the drops, for this, if not as a last resort, please do not remove easily.
C. sometimes only inclined guide rail, slider will be mobile, so at this time should be careful not to make the slider off from the guide rail.
D. standard end cover is made of plastic. Such as hard knocks or collision, will make its damage, so want to pay attention.
(3) use the matters needing attention
A. when used, please try to avoid dust or foreign bodies to enter.
B. please to set the temperature limit below 80 degrees (except for heat resistant specifications of the products.) more than the temperature, the plastic end cover may be damaged.
C. when customers themselves cut guide rail, the cutting surface after cutting burr and become warped edge entirely clean.
D. the slider in the suspended state (such as fixed on the ceiling slider downwards) when using, such as one thousand end cover is damaged, ball will roll out, lead to fall off from sliding block guide rail. For this purpose, please take the corresponding measures such as additional safety device in advance.
(4) keeping
Such as the bad condition of guide rail is placed, can cause rail deformation. The custody, it should be placed in an appropriate plane, horizontally to keep.
