The installation of self-aligning bearing
Most favorable price : sales@hellerbearings.com
Type for the separable bearings, inner ring and outer ring can be installed separately, thus simplify the installation process, especially when the inside and outside the circle must be especially interference fit. In the inner ring has been installed in place of the axial load including outer ring of bearing box, must pay attention to see if inside and outside the circle to the right, in order to avoid scratch bearing raceway and rolling parts. If a cylinder and needle bearing with without the inner ring or side of the flange rim flange edge of the inner ring, it is recommended to use to install the sleeve. Outside diameter should be equal to the inner ring raceway diameter of sleeve F, machining tolerance standards shall be the d10. Drawn cup needle roller bearing is best to use the core shaft installation.
234407BM 234706BM 234406BM 517/2860V/YA 5610/2500 517/1720X1V 527/1181M 510/1180M 517/930 510/670 590/560 510/500 52780 59080 517/368M 51760U 517/238 6207-2ZN 6206-2ZN 6205-2ZN 6204-2ZN 6203-RZ 6203-2ZN 6202N 6202-2ZN 6201-2ZN 6200ZZ 6200-2ZN 62/32-ZN 62/32-Z 62/32N 62/32-2Z 62/32-2RZ 62/32-2RS 62/28-2RZ 62/22-2RZ 61996 61992 61988 61984
We can provide free samples . Please contact Email for any inquiries
For the self-aligning bearing, the shaft bearing load case shaft hole, using middle ring installation can prevent the outer ring tilt and rotate. Should keep in mind that some of the size of the self-aligning ball bearing of ball protrudes from the side of the bearing, so the middle ring should be recessed installation, in case of damage to the ball. A large number of bearings are generally use mechanical or hydraulic pressure into the method for installation.Type for the separable bearings, inner ring and outer ring can be installed separately, thus simplify the installation process, especially when the inside and outside the circle must be especially interference fit. In the inner ring has been installed in place of the axial load including outer ring of bearing box, must pay attention to see if inside and outside the circle to the right, in order to avoid scratch bearing raceway and rolling parts. If a cylinder and needle bearing with without the inner ring or side of the flange rim flange edge of the inner ring, it is recommended to use to install the sleeve. Outside diameter should be equal to the inner ring raceway diameter of sleeve F, machining tolerance standards shall be the d10. Drawn cup needle roller bearing is best to use the core shaft installation.
