We can provide free samples . Please contact Email for any inquiries

For self-aligning bearings with shaft bearing into the housing bore, using an intermediate mounting ring prevents the outer ring to swivel and tilt. It should be remembered that some size self-aligning ball bearings ball protruding from the side of the bearing, so the middle of the mounting ring should be recessed to prevent damage to the ball. A large number of bearings are generally mechanical or hydraulic pressure method of installation.

Separable bearing inner and outer rings can be installed separately, thus simplifying the installation process, especially when the inner and outer rings are subject to interference fit is especially true. Loaded in the axis of the inner ring has been installed in place included the outer ring of the bearing housing, you must pay attention to see whether the inner and outer rings correctly, to avoid scratches bearing raceways and rolling elements. Cylindrical and needle roller bearings with inner ring without flange wall or the side of the inner ring flange, it is recommended to use the mounting sleeve. The outer diameter of the sleeve should be equal to the inner ring raceway diameter F machining tolerance standards for d10.