We can provide free samples . Please contact Email for any inquiries

Clutch release bearing is one of the more important parts, car if fail because of poor maintenance, not only will cause economic losses, and disassembling time quite trouble, take many hours. So, find out the clutch release bearing failure reason, and in the use of preventive maintenance and reasonably, to prolong the life of release bearing, improve labor productivity, achieving good economic benefit has important significance. Clutch release bearing installed between the clutch and gearbox, the separation of bearing sleeve bearing cover the shaft of the transmission for the first tubular extension, make through return spring release bearing convex shoulder always resist separation fork, and return to the last position, keep around 2.5 mm gap with separation of lever. Because the clutch pressure plate, separate leverage and engine crank synchronous operation, and the separation of the fork can only move, the clutch output shaft axis with separation fork to dial directly separate lever is obviously not enough, by rotating a separation bearings can make separation lever side edge of the clutch output shaft axial movement, so as to ensure the clutch can engage a smooth, separation of downy, reduce wear and tear, prolong the service life of the clutch and the whole drive train.