We can provide free samples . Please contact Email for any inquiries

If through listen IKO bearings running the sound, temperature measurement or check the lubricant and other methods that can determine the bearing in the operation of the situation and then, usually every year just external spherical bearings (inner and outer rings, to keep the frame and rolling elements) and bearing The other part of the structure to conduct a thorough cleaning and inspection. under heavy load, the need to increase the number of checks. For example, the bearings of the rolling equipment can often be checked when replacing the roll.

The clean spherical bearing parts in the appropriate solvent (petroleum solvents, paraffin, etc.), should immediately add the oil or grease to prevent corrosion. This is particularly important bearing of the equipment will be idle for a long time.

Grease pre-filled grease in the sealed type bearings seals, as well as filling the right amount of grease inside the housing, from time to time supplement or replace the filling for the way fat. In addition, many IKO bearings need lubrication of mechanical pipe connected to the lubrication at the central fat way. Grease lubrication can be achieved without added long after the filling time grease and seals the structure is relatively simple and therefore widely used. Oil lubrication is relatively simple. Frequently lubrication can increase the bearing life.

1. Rotating the outer ring and carefully rinse the cage, rolling element and raceway at the junction of any hidden parts of the residue of the original traces of oil thoroughly cleansed. Spherical bearings should be attached to the dry cleaning Youlin, on the workbench dry lined with a clean, neutral mount, or slowly in the far-infrared oven drying after washing clean. Drying or drying, dry cleaning Youlin as well as rotating bearing ring, the whole process may not adhere to the frame or any rolling element. IKO bearings to be delivered before the convention to check in order to remove oil seal packaging, and immersed in the washing gasoline containing 3 percent oil or acid-free kerosene.

2. Should be required to instillation of the lubricant and immediately delivered the check, dry or drying the bearing. Bearing outer surface film protection are not directly touch on staffing skin throughout the inspection process, the operator should wear clean gloves, or hand painted but must avoid the hands of a rust inhibitor, rust inhibitors mixed with spherical bearings rolling appearance, otherwise it would be to measure the result of a deviation.

3. Should be delivered immediately or rust-proof inventory processing, the entire inspection process should be to accomplish, bearings checked. So as not lasted too long to cause corrosion. Attention to the use of pure gasoline to clean without oil will cause corrosion.
 

4. Dry or drying the bearing should be required to instillation of lubricants and immediately delivered the check, this time no oil film to protect the outer surface of the IKO bearings are not allowed to directly touch the manpower skin throughout the inspection process, the operator should wear clean gloves or hands coated with a rust inhibitor, but must avoid the hands of anti-rust agent mixed with the rolling surface of the spherical bearing, otherwise it would measure the results of deviations occur.