The oil knowledge of NTN bearing when it runs
Most favorable price : sales@hellerbearings.com
NTN Bearing Maintenance Technology two complex issues: When oil and how much oil should be change. If the oil too little, NTN Bearing early retirement; the oil too much, NTN Bearing in trouble or long-term harm power coil and wire.
Traditionally, the lubrication plan is scheduled. Equipment suppliers usually depending on the operating time to develop the lubrication plan. And equipment suppliers in the course of their maintenance program, often the amount of the lubricating oil by adding guidance. Staff for short-term replacement of oil is a very common thing, and often added to grease the high side. Require staff every two to three weeks to replace a lubricant every time you add an ounce of grease. These recommendations are a beginning cause they are built up in the absence of any practical significance do not know the factors.
Lubrication intervals on a simple premise: NTN Bearing does not stop running due to dry and collapse under the conditions to maintain a reasonable operation of the equipment. This is a fixed concept of prevention. However, we must maintain the balance between the lubrication thirst and excessive lubrication.
234407BM 234706BM 234406BM 517/2860V/YA 5610/2500 517/1720X1V 527/1181M 510/1180M 517/930 510/670 590/560 510/500 52780 59080 517/368M 51760U 517/238 6207-2ZN 6206-2ZN 6205-2ZN 6204-2ZN 6203-RZ 6203-2ZN 6202N 6202-2ZN 6201-2ZN 6200ZZ 6200-2ZN 62/32-ZN 62/32-Z 62/32N 62/32-2Z 62/32-2RZ 62/32-2RS 62/28-2RZ 62/22-2RZ 61996 61992 61988 61984
We can provide free samples . Please contact Email for any inquiries
What bearing, we all need oil changes, NTN Bearing quality is better, in the use of operation, oil is essential, although NTN Bearing time oil will not be a problem, but a long time does not changeoil, then it will affect the life of NTN bearings. The use of NTN Bearing, we should pay attention to the NTN Bearing oil change, oil change, NTN bearings in order to properly operate, so as to NTN Bearing good run down. NTN Bearing in operation, when the oil change it? We came to a brief introduction.NTN Bearing Maintenance Technology two complex issues: When oil and how much oil should be change. If the oil too little, NTN Bearing early retirement; the oil too much, NTN Bearing in trouble or long-term harm power coil and wire.
Traditionally, the lubrication plan is scheduled. Equipment suppliers usually depending on the operating time to develop the lubrication plan. And equipment suppliers in the course of their maintenance program, often the amount of the lubricating oil by adding guidance. Staff for short-term replacement of oil is a very common thing, and often added to grease the high side. Require staff every two to three weeks to replace a lubricant every time you add an ounce of grease. These recommendations are a beginning cause they are built up in the absence of any practical significance do not know the factors.
Lubrication intervals on a simple premise: NTN Bearing does not stop running due to dry and collapse under the conditions to maintain a reasonable operation of the equipment. This is a fixed concept of prevention. However, we must maintain the balance between the lubrication thirst and excessive lubrication.
