We can provide free samples . Please contact Email for any inquiries

Bearing is an important component engineering machinery, poor installation will affect their results, and even cause construction machinery and equipment failures.
    If there are NSK Bearings iron, burrs, dust and other foreign matter from entering, will make bearing noise and vibration generated during operation and even damage raceways and rolling elements. Prior to installation, NSK Bearings, must ensure that the clean mounting surface and installation environment.
    Lubrication has a very important impact on the operation and life of the bearing. Grease is made of base oil, thickener and additives. Is mainly determined by the performance of the grease base oil. Usually the low viscosity base oil for low temperature, high speed; high viscosity suitable for high temperature, high load.
    Thickeners are also related to the lubricating properties, grease thickeners water determines the water resistance. In principle, you can not mix greases of different brands, and even the same kind of grease thickeners, also because of different additives adversely affect each other. NSK bearings coated with anti-rust oil, must be carefully cleaned with gasoline or kerosene, and then coated with a clean high-quality or high temperature grease before installation. Closed bearings do not need to clean fuel.
    After NSK Bearings installed, if not carefully for alignment, alignment may lead to additional load bearing subjected to friction and vibration. These may accelerate fatigue and reduce the life of NSK bearings, and may damage the life of other machine parts. In addition, increased vibration and friction can significantly increase energy consumption and the risk of premature failure.
During use, the basic external conditions should always NSK Bearings run monitoring, such as temperature, vibration and noise measurement and so on. These regular inspections will identify potential problems early and prevent unexpected machine suspension phenomenon, so that production plans are realized, to improve plant productivity and efficiency.
In the course of the operation, NSK Bearings requires a correct re-lubrication, perfect its performance. NSK Bearings lubrication method, divided into grease and oil lubrication. In order to make a good play NSK Bearings function, first, to select the appropriate conditions, the use of lubrication purposes. If only consider lubrication, oil lubrication dominant. But there can be simplified specialty grease around the bearing structure.
NSK Bearings piston pump with the most important parts are bearings NSK bearings to reduce the negative pressure in the basic requirement is to prevent water from entering. Angular contact bearing load calculation. Locomotive bearing maintenance is very important to the oil.