Bearing torque, load and life
Most favorable price : sales@hellerbearings.com
234407BM 234706BM 234406BM 517/2860V/YA 5610/2500 517/1720X1V 527/1181M 510/1180M 517/930 510/670 590/560 510/500 52780 59080 517/368M 51760U 517/238 6207-2ZN 6206-2ZN 6205-2ZN 6204-2ZN 6203-RZ 6203-2ZN 6202N 6202-2ZN 6201-2ZN 6200ZZ 6200-2ZN 62/32-ZN 62/32-Z 62/32N 62/32-2Z 62/32-2RZ 62/32-2RS 62/28-2RZ 62/22-2RZ 61996 61992 61988 61984
We can provide free samples . Please contact Email for any inquiries
1. starting torque starting torque
Bearing rings or washers relative to the beginning of another fixed rings or washers torque required to rotate.
2. Turning moment running torque
When you rotate one of the bearing rings or washers, blocking movement of another set of rings or washers required moment.
3. radial load radial load
Acting on vertical load bearing axis direction.
4. shaft load axial load
Load acting on the bearing axis parallel direction.
5. static load static load
When the bearing rings or washers relative rotation speed is zero (radial or thrust bearings) or when the rolling elements when there is no movement in the rolling direction (linear bearings), acting on the bearing load.
6. dynamic load dynamic load
When the bearing rings or washers when the relative rotation (radial or thrust bearings) or when the scroll bar component when the scroll direction (linear bearings), acting on the bearing load.
7. the equivalent load equivalent load
Theory of computation load in general terms, on a particular occasion, bearing the theory under load like a bear the actual load.
8. the radial (axial) basic static load rating basic static radial (axial) load rating
And rolling elements and raceways correspond to the total amount of permanent deformation of radial static load (axial static load Center). If under zero load, rollers and raceways (roller bearings) or assumed to be normal bus (full contact), under maximum contact stresses, rolling elements and raceways contact total amount of permanent deformation of 0.0001 times times the rolling element diameter. Single row angular contact ball bearings, radial load rating for the bearing rings relative to each other purely radial displacement caused by the radial component of the load.
9. radial (axial) basic dynamic rated load basic dynamic radial (axial) load rating
Constant radial load (constant axial load Center), in which the loads, rolling bearings can theoretically withstand the basic rating life of 1 million revolutions. Single row angular contact ball bearings, the radial load rating for the bearing rings relative to each other purely radial displacement caused by load weight.
10. life (referring to a set of bearings) life
Bearing a ring or a washer or a rolling before the material fatigue for the first time, a ring or a washer with respect to another ring or a washer to a few. Life can also be used in running to represent the number of hours given the constant speed.
11. reliability (refer to bearing life) reliability
Operate under the same conditions a group of nearly the same expectation of rolling bearing reaches or exceeds a certain percentage of life of bearings. A bearing reliability of bearings to meet or exceed a specified probability of life.
12. the rated lifetime rating life
Radial basic dynamic load rating, or axis to the basic dynamic load rating is based on the life of predicted values.
13. the basic rating life basic rating life
Associated with the 90% reliability rating life.
14. the life expectancy coefficient life factor
In order to get the corresponding to the given rating life of basic dynamic radial load rating or basic dynamic axial load rating, correction coefficients applicable to the equivalent dynamic load.
15. the pillow block bearing plummer block
Radial spherical plain bearing and combined to a component, in parallel with the axis of the bearing support surface for mounting screws on the backplane.
16. vertical plummer block housing
Load bearing.
17. flange flanged housing
Radial flange and with bearing on the vertical axis of the support surface for the screw holes for installation by a block.
18. the adapter sleeve adapter sleeve
Cylindrical axial opening holes in the sleeve, its appearance is conical and small end male thread. Used to install the bearings with a tapered bore (with lock nuts and lock washers) on the outer surface of the cylindrical axis.
19. withdrawal sleeve withdrawal sleeve
Has a cylindrical bore axis to the opening of the sleeve, its appearance is conical and the big end male thread. For bearings with a tapered bore on the outer surface of the cylindrical axis installation or removal (with nuts).
20. lock nut locknut
Cylindrical outer surface and axial slot screws, lock washer, an external claw and ring spanner nuts lock tight. For rolling bearing axial position.
21. lock washer lockwasher
There are many external claw of thin steel plate washers. A claw used to lock nut, a claw insert adapter sleeve or shaft axial Groove.
22. the eccentric sleeve eccentric locking collar
One end has a relatively eccentric Groove of inner hole rims, install equal elongation of the eccentric outer spherical bearing inner ring side. Relative to the inner ring rotation eccentric sleeve to tighten the inner ring and then guding wire to tighten on the shaft.
23. the concentric sets of concentric locking collar
Installed on the outer spherical bearings with extended inner rings, steel, screw screwed into the holes on the inner ring and in contact with the shaft.
Bearing rings or washers relative to the beginning of another fixed rings or washers torque required to rotate.
2. Turning moment running torque
When you rotate one of the bearing rings or washers, blocking movement of another set of rings or washers required moment.
3. radial load radial load
Acting on vertical load bearing axis direction.
4. shaft load axial load
Load acting on the bearing axis parallel direction.
5. static load static load
When the bearing rings or washers relative rotation speed is zero (radial or thrust bearings) or when the rolling elements when there is no movement in the rolling direction (linear bearings), acting on the bearing load.
6. dynamic load dynamic load
When the bearing rings or washers when the relative rotation (radial or thrust bearings) or when the scroll bar component when the scroll direction (linear bearings), acting on the bearing load.
7. the equivalent load equivalent load
Theory of computation load in general terms, on a particular occasion, bearing the theory under load like a bear the actual load.
8. the radial (axial) basic static load rating basic static radial (axial) load rating
And rolling elements and raceways correspond to the total amount of permanent deformation of radial static load (axial static load Center). If under zero load, rollers and raceways (roller bearings) or assumed to be normal bus (full contact), under maximum contact stresses, rolling elements and raceways contact total amount of permanent deformation of 0.0001 times times the rolling element diameter. Single row angular contact ball bearings, radial load rating for the bearing rings relative to each other purely radial displacement caused by the radial component of the load.
9. radial (axial) basic dynamic rated load basic dynamic radial (axial) load rating
Constant radial load (constant axial load Center), in which the loads, rolling bearings can theoretically withstand the basic rating life of 1 million revolutions. Single row angular contact ball bearings, the radial load rating for the bearing rings relative to each other purely radial displacement caused by load weight.
10. life (referring to a set of bearings) life
Bearing a ring or a washer or a rolling before the material fatigue for the first time, a ring or a washer with respect to another ring or a washer to a few. Life can also be used in running to represent the number of hours given the constant speed.
11. reliability (refer to bearing life) reliability
Operate under the same conditions a group of nearly the same expectation of rolling bearing reaches or exceeds a certain percentage of life of bearings. A bearing reliability of bearings to meet or exceed a specified probability of life.
12. the rated lifetime rating life
Radial basic dynamic load rating, or axis to the basic dynamic load rating is based on the life of predicted values.
13. the basic rating life basic rating life
Associated with the 90% reliability rating life.
14. the life expectancy coefficient life factor
In order to get the corresponding to the given rating life of basic dynamic radial load rating or basic dynamic axial load rating, correction coefficients applicable to the equivalent dynamic load.
15. the pillow block bearing plummer block
Radial spherical plain bearing and combined to a component, in parallel with the axis of the bearing support surface for mounting screws on the backplane.
16. vertical plummer block housing
Load bearing.
17. flange flanged housing
Radial flange and with bearing on the vertical axis of the support surface for the screw holes for installation by a block.
18. the adapter sleeve adapter sleeve
Cylindrical axial opening holes in the sleeve, its appearance is conical and small end male thread. Used to install the bearings with a tapered bore (with lock nuts and lock washers) on the outer surface of the cylindrical axis.
19. withdrawal sleeve withdrawal sleeve
Has a cylindrical bore axis to the opening of the sleeve, its appearance is conical and the big end male thread. For bearings with a tapered bore on the outer surface of the cylindrical axis installation or removal (with nuts).
20. lock nut locknut
Cylindrical outer surface and axial slot screws, lock washer, an external claw and ring spanner nuts lock tight. For rolling bearing axial position.
21. lock washer lockwasher
There are many external claw of thin steel plate washers. A claw used to lock nut, a claw insert adapter sleeve or shaft axial Groove.
22. the eccentric sleeve eccentric locking collar
One end has a relatively eccentric Groove of inner hole rims, install equal elongation of the eccentric outer spherical bearing inner ring side. Relative to the inner ring rotation eccentric sleeve to tighten the inner ring and then guding wire to tighten on the shaft.
23. the concentric sets of concentric locking collar
Installed on the outer spherical bearings with extended inner rings, steel, screw screwed into the holes on the inner ring and in contact with the shaft.
